Description
The STE2800 RF Shielded Test Enclosure provides a controlled RF environment for accurate wireless device testing. Engineers use this enclosure to block outside interference and improve test consistency during development, validation, and production.
This RF shielded test enclosure supports common wireless technologies, including Bluetooth, WLAN, and Cellular. By reducing unwanted RF signals, it helps teams achieve repeatable results and reliable measurements in both lab and manufacturing settings.
Designed for OTA and Radiated Testing
Engineers commonly use the STE2800 RF Shielded Test Enclosure for over-the-air (OTA) testing. OTA testing evaluates the full device, including the antenna and enclosure effects. This method gives a more realistic view of real-world wireless performance than conducted testing.
The enclosure allows engineers to test finished products without removing or modifying antennas. As a result, teams can validate true device behavior before release.
Flexible Configuration and Integration
The STE2800 supports flexible test setups. Engineers can add antenna couplers, filtered connectors, and custom interfaces to match specific test needs. The enclosure also supports fixture mounting, which helps secure devices during testing.
These options make it easier to adapt the enclosure for different products and test stages. Teams can move quickly between development, validation, and production workflows.
Improved Repeatability in Production Environments
In production and quality testing, the STE2800 RF Shielded Test Enclosure helps reduce test variation. It minimizes outside RF noise and creates stable test conditions. This stability improves throughput and reduces false failures.
Manufacturers often pair the enclosure with RF shield boxes and OTA testing solutions to build scalable test systems.
Built to Support Industry Standards
Wireless devices must meet industry requirements for performance and reliability. Standards organizations such as IEEE and 3GPP define these expectations. Shielded enclosures like the STE2800 help teams test devices under controlled conditions that align with these standards.
A Practical Solution for Wireless Validation
With strong RF isolation, flexible options, and simple integration, the STE2800 RF Shielded Test Enclosure offers a dependable solution for wireless and OTA testing across the full product lifecycle.
IO Configurations
Custom Configuration Options
- RF FEEDTHROUGH: BNC, TNC, SMA, SMB, UHF, Type-N
- FIBER OPTIC: Fiber optic bulkhead feedthrough, ST, FC
- DUST COVERS: Dust cover capes with security chains available for all RF feedthrough connectors
- RF FILTERED DATA: DB9 (10pF), DB9 (100pF), DB9 (1000pF), DB15 (100pF), DB15 (1000pF), DB25 (310pF), DB25 (1000pF), DB37 (310pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB1/DB9 Filtered
- POWER CONNECTIONS: 4-Pole filtered barrier strip feed through, 6-Pole filtered barrier strip feed through, internal surge protected power strips (110VAC, 220VAC International)
- VENTILATION OPTIONS: Dual side mounted RF filtered vents with single filtered exhaust muffin fan, passive vent only
- RF ABSORBENT FOAM: Standard 1/2″ thick RF absorbent foram liner provides 24dB attenuation. 3/4″ thick foam is standard on the STE3800 and available as an option to provide a flatter response
- FIBER TRANSCEIVER: Icron Technologies USB 2.0 Fiber Transceiver System available for devices up to 480 MB/s
Note: RF Isolation specs are measured at 1M with terminated RF feedthrough coaxial connectors installed. Actual isolation & attenuation can be affected by adding additional filtered and non-filtered connectors. Check with us for specific connector specifications. STE series I/O interfaces, connectors, and options are frequently updated. Check with us for updates.
| I/O Interface | Order Number | Typical Data Rate/Line Voltage | Typical Shielding* |
DB37, 1000pF pi Filter | 3409-0012-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB25, 1000pF pi Filter | 3409-0009-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB25, 100pF pi Filter | 3409-0014-1 | 10 Mbps / 100 VDC,
5 Amps max | >50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz |
DB9, 1000pF pi Filter | 3409-0008-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB9, 100pF pi Filter | 3409-0010-1 | 10 Mbps / 100 VDC,
5 Amps max | >50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz |
 | STEUSB2071 |
Max Current: 2A | >80 dB from 741MHz to 6 GHz |
 | STEETHD10G | 10 Gbps | >80dB 100MHz to 40GHz |
 | STEUSB3CC | Max Current 3.75A | >90 DB 200MHz to 8 GHz |
 | STEUSB312 | Max Current: 2A | >90 DB 200MHz to 8 GHz |
 | STEGBE4591 | 1 GBps | >90 DB 700MHz to 8 GHz |
 | IEC25010C | 250 VAC 10A | >80 dB at 200 MHz to 30 GHz |
 | STEDC2010 | 100 VDC 10A, 48VAC, 10 A | >90 dB 1GHz to 3 GHz |
