Description
The STE5100 Shielded Test Enclosure is engineered to provide reliable RF isolation for wireless device development, validation, and manufacturing testing. This enclosure creates a controlled RF environment that blocks external interference and prevents unwanted signal leakage during critical test procedures.
Engineers rely on the STE5100 Shielded Test Enclosure to test RF-enabled products such as PCBs, wireless modules, IoT devices, and fully assembled systems. By isolating the device under test from ambient RF signals, the enclosure ensures consistent and repeatable measurement results across Wi-Fi, Bluetooth, cellular, and other wireless technologies.
High-Isolation RF Shielded Enclosure for Lab and Production
This RF shielded enclosure supports both laboratory research and high-throughput production environments. Its durable construction delivers dependable shielding effectiveness while maintaining proper airflow and thermal stability. As a result, devices can operate within published specifications during extended test cycles without performance degradation.
Flexible Integration and Configuration Options
The STE5100 supports a variety of configuration options to meet evolving testing requirements. Available features include RF connectors, filtered I/O panels, automation-ready interfaces, and custom port layouts. Because of this flexibility, the enclosure integrates easily into existing test setups and automated systems.
Reliable Performance for High-Throughput Testing
Designed for long-term use, the enclosure balances RF isolation, usability, and mechanical durability. This design improves workflow efficiency and supports stable, repeatable testing across multiple stations.
Typical Applications
-
Wireless device development and validation
-
RF performance and pre-compliance testing
-
Manufacturing and production verification
-
Secure RF isolation in lab environments
Overall, the STE5100 Shielded Test Enclosure provides a scalable, dependable solution for teams that require accurate RF measurements and consistent test performance.
IO Configurations
Custom Configuration Options
- RF FEEDTHROUGH: BNC, TNC, SMA, SMB, UHF, Type-N
- FIBER OPTIC: Fiber optic bulkhead feedthrough, ST, FC
- DUST COVERS: Dust cover capes with security chains available for all RF feedthrough connectors
- RF FILTERED DATA: DB9 (10pF), DB9 (100pF), DB9 (1000pF), DB15 (100pF), DB15 (1000pF), DB25 (310pF), DB25 (1000pF), DB37 (310pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB1/DB9 Filtered
- POWER CONNECTIONS: 4-Pole filtered barrier strip feed through, 6-Pole filtered barrier strip feed through, internal surge protected power strips (110VAC, 220VAC International)
- VENTILATION OPTIONS: Dual side mounted RF filtered vents with single filtered exhaust muffin fan, passive vent only
- RF ABSORBENT FOAM: Standard 1/2″ thick RF absorbent foram liner provides 24dB attenuation. 3/4″ thick foam is standard on the STE3800 and available as an option to provide a flatter response
- FIBER TRANSCEIVER: Icron Technologies USB 2.0 Fiber Transceiver System available for devices up to 480 MB/s
Note: RF Isolation specs are measured at 1M with terminated RF feedthrough coaxial connectors installed. Actual isolation & attenuation can be affected by adding additional filtered and non-filtered connectors. Check with us for specific connector specifications. STE series I/O interfaces, connectors, and options are frequently updated. Check with us for updates.
| I/O Interface | Order Number | Typical Data Rate/Line Voltage | Typical Shielding* |
DB37, 1000pF pi Filter | 3409-0012-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB25, 1000pF pi Filter | 3409-0009-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB25, 100pF pi Filter | 3409-0014-1 | 10 Mbps / 100 VDC,
5 Amps max | >50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz |
DB9, 1000pF pi Filter | 3409-0008-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB9, 100pF pi Filter | 3409-0010-1 | 10 Mbps / 100 VDC,
5 Amps max | >50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz |
 | STEUSB2071 |
Max Current: 2A | >80 dB from 741MHz to 6 GHz |
 | STEETHD10G | 10 Gbps | >80dB 100MHz to 40GHz |
 | STEUSB3CC | Max Current 3.75A | >90 DB 200MHz to 8 GHz |
 | STEUSB312 | Max Current: 2A | >90 DB 200MHz to 8 GHz |
 | STEGBE4591 | 1 GBps | >90 DB 700MHz to 8 GHz |
 | IEC25010C | 250 VAC 10A | >80 dB at 200 MHz to 30 GHz |
 | STEDC2010 | 100 VDC 10A, 48VAC, 10 A | >90 dB 1GHz to 3 GHz |
