Description
The STE3000FAV2 Forensics Shielded Enclosure is purpose-built for forensic investigations that require complete RF isolation during the examination and extraction of data from wireless devices. This enclosure creates a secure, controlled environment that prevents external communication while allowing full hands-on access to evidence devices.
Designed for law enforcement and digital forensics labs, the STE3000FAV2 Forensics Shielded Enclosure supports the analysis of cell phones, smartphones, PDAs, and other RF-enabled devices. Investigators can power, access, and manipulate devices without the risk of remote wiping, tampering, or signal leakage.
High-Isolation RF Shielding for Forensic Evidence
This forensics shielded enclosure delivers reliable RF isolation across common wireless technologies. It blocks Wi-Fi, Bluetooth, cellular, RFID, and other RF signals to ensure devices remain fully isolated from the outside world. As a result, investigators can perform secure data collection and analysis with confidence.
Designed for Hands-On Forensic Workflows
Unlike passive storage solutions, the enclosure supports active forensic workflows. A variety of I/O options allow devices to remain powered and connected to forensic tools during analysis. This flexibility makes the STE3000FAV2 Forensics Shielded Enclosure well suited for real-time data extraction, validation, and evidence preservation.
Proven Technology for Secure Investigations
Built on Ramsey’s long history of RF isolation solutions, this enclosure extends proven shielding technology into forensic applications. It provides consistent performance, durable construction, and reliable operation in demanding investigative environments.
Typical Applications
-
Forensic examination of mobile devices
-
Secure isolation of wireless evidence
-
Controlled data extraction and analysis
-
Law enforcement and digital forensics laboratories
Overall, the STE3000FAV2 Forensics Shielded Enclosure delivers a dependable solution for investigators who require secure RF isolation without limiting access to critical evidence.
IO Configurations
Custom Configuration Options
- RF FEEDTHROUGH: BNC, TNC, SMA, SMB, UHF, Type-N
- FIBER OPTIC: Fiber optic bulkhead feedthrough, ST, FC
- DUST COVERS: Dust cover capes with security chains available for all RF feedthrough connectors
- RF FILTERED DATA: DB9 (10pF), DB9 (100pF), DB9 (1000pF), DB15 (100pF), DB15 (1000pF), DB25 (310pF), DB25 (1000pF), DB37 (310pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB1/DB9 Filtered
- POWER CONNECTIONS: 4-Pole filtered barrier strip feed through, 6-Pole filtered barrier strip feed through, internal surge protected power strips (110VAC, 220VAC International)
- VENTILATION OPTIONS: Dual side mounted RF filtered vents with single filtered exhaust muffin fan, passive vent only
- RF ABSORBENT FOAM: Standard 1/2″ thick RF absorbent foram liner provides 24dB attenuation. 3/4″ thick foam is standard on the STE3800 and available as an option to provide a flatter response
- FIBER TRANSCEIVER: Icron Technologies USB 2.0 Fiber Transceiver System available for devices up to 480 MB/s
Note: RF Isolation specs are measured at 1M with terminated RF feedthrough coaxial connectors installed. Actual isolation & attenuation can be affected by adding additional filtered and non-filtered connectors. Check with us for specific connector specifications. STE series I/O interfaces, connectors, and options are frequently updated. Check with us for updates.
| I/O Interface | Order Number | Typical Data Rate/Line Voltage | Typical Shielding* |
DB37, 1000pF pi Filter | 3409-0012-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB25, 1000pF pi Filter | 3409-0009-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB25, 100pF pi Filter | 3409-0014-1 | 10 Mbps / 100 VDC,
5 Amps max | >50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz |
DB9, 1000pF pi Filter | 3409-0008-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB9, 100pF pi Filter | 3409-0010-1 | 10 Mbps / 100 VDC,
5 Amps max | >50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz |
 | STEUSB2071 |
Max Current: 2A | >80 dB from 741MHz to 6 GHz |
 | STEETHD10G | 10 Gbps | >80dB 100MHz to 40GHz |
 | STEUSB3CC | Max Current 3.75A | >90 DB 200MHz to 8 GHz |
 | STEUSB312 | Max Current: 2A | >90 DB 200MHz to 8 GHz |
 | STEGBE4591 | 1 GBps | >90 DB 700MHz to 8 GHz |
 | IEC25010C | 250 VAC 10A | >80 dB at 200 MHz to 30 GHz |
 | STEDC2010 | 100 VDC 10A, 48VAC, 10 A | >90 dB 1GHz to 3 GHz |
