Description
The STE3000 RF Shielded Test Enclosure provides reliable RF isolation for wireless device testing. It supports accurate measurements in both laboratory and production environments. The enclosure creates a controlled RF space that reduces external interference and prevents unwanted device communication.
Engineers use the STE3000 to test RF-enabled products such as PCBs, wireless modules, and fully assembled devices. By blocking ambient RF signals, the enclosure helps deliver consistent results. This consistency improves confidence during Wi-Fi, Bluetooth, cellular, and other wireless evaluations.
The enclosure features a durable design that balances shielding effectiveness with thermal stability. Devices can operate within published specifications during extended test cycles. As a result, teams can run longer tests without compromising performance or safety.
The STE3000 also supports flexible configuration options. These include RF connectors, filtered I/O interfaces, and automation-ready features. Because of this flexibility, teams can adapt the enclosure to different test setups and future requirements.
Typical Applications
-
Wireless device development and validation
-
RF performance and pre-compliance testing
-
Manufacturing and production testing
-
Lab environments requiring repeatable RF isolation
Overall, the STE3000 RF Shielded Test Enclosure delivers dependable isolation, clear results, and efficient test workflows. It is a practical solution for teams that require accuracy, reliability, and scalability in RF testing.
IO Configurations
Custom Configuration Options
- RF FEEDTHROUGH: BNC, TNC, SMA, SMB, UHF, Type-N
- FIBER OPTIC: Fiber optic bulkhead feedthrough, ST, FC
- DUST COVERS: Dust cover capes with security chains available for all RF feedthrough connectors
- RF FILTERED DATA: DB9 (10pF), DB9 (100pF), DB9 (1000pF), DB15 (100pF), DB15 (1000pF), DB25 (310pF), DB25 (1000pF), DB37 (310pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB1/DB9 Filtered
- POWER CONNECTIONS: 4-Pole filtered barrier strip feed through, 6-Pole filtered barrier strip feed through, internal surge protected power strips (110VAC, 220VAC International)
- VENTILATION OPTIONS: Dual side mounted RF filtered vents with single filtered exhaust muffin fan, passive vent only
- RF ABSORBENT FOAM: Standard 1/2″ thick RF absorbent foram liner provides 24dB attenuation. 3/4″ thick foam is standard on the STE3800 and available as an option to provide a flatter response
- FIBER TRANSCEIVER: Icron Technologies USB 2.0 Fiber Transceiver System available for devices up to 480 MB/s
Note: RF Isolation specs are measured at 1M with terminated RF feedthrough coaxial connectors installed. Actual isolation & attenuation can be affected by adding additional filtered and non-filtered connectors. Check with us for specific connector specifications. STE series I/O interfaces, connectors, and options are frequently updated. Check with us for updates.
| I/O Interface | Order Number | Typical Data Rate/Line Voltage | Typical Shielding* |
DB37, 1000pF pi Filter | 3409-0012-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB25, 1000pF pi Filter | 3409-0009-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB25, 100pF pi Filter | 3409-0014-1 | 10 Mbps / 100 VDC,
5 Amps max | >50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz |
DB9, 1000pF pi Filter | 3409-0008-1 | 3 Mbps / 100 VDC,
5 Amps max | >70 dB from 0.5 to 2 GHz
>80 dB from 2 to 3 GHz
>70 dB from 3 to 6 GHz |
DB9, 100pF pi Filter | 3409-0010-1 | 10 Mbps / 100 VDC,
5 Amps max | >50 dB from 0.5 to 2 GHz
>60 dB from 2 to 3 GHz
>60 dB from 3 to 6 GHz |
 | STEUSB2071 |
Max Current: 2A | >80 dB from 741MHz to 6 GHz |
 | STEETHD10G | 10 Gbps | >80dB 100MHz to 40GHz |
 | STEUSB3CC | Max Current 3.75A | >90 DB 200MHz to 8 GHz |
 | STEUSB312 | Max Current: 2A | >90 DB 200MHz to 8 GHz |
 | STEGBE4591 | 1 GBps | >90 DB 700MHz to 8 GHz |
 | IEC25010C | 250 VAC 10A | >80 dB at 200 MHz to 30 GHz |
 | STEDC2010 | 100 VDC 10A, 48VAC, 10 A | >90 dB 1GHz to 3 GHz |
