TC-5972DP/CP Series RF Shield Box

• High RF shielding
• Easy Opening/Closing of Door
• 4 Standard RF Ports(N-Type Outside, SMA Inside)
• EMI filters on all Data and DC lines
• Installs up to Two Optional I/O Module Interfaces
• Easily Field Replaceable Rear I/O modules
• Multi-layer absorber for radiation testing
• Pneumatic control of lid open-close and optional test fixture motions
• Shock Absorbers on lid
• Red and Green LED’s for Pass/Fail indication
• EMI filters on all data ports and power line
• Remote operation by RS-232C
• Ferrite observer for radiation testing (TC-5972CP)

Mechanical Specifications

• RF Connectors without module: 4 N (f) outside and SMA (f) inside
• Line voltage: DC 24 V, Max. 2A.
• Remote control: RS-232C, 3 wire, DB9(s)
• Air connection
  • Main Connector: 6 mm OD hose, one-touch push-on fitting
  • Fixture Control Connector: 4 mm OD hose, one-touch push-on fitting
  • Input Air Pressure: 5 to 10 bar
• Dimensions
  • Inside: 470(W) x 470(D) x 360(H) mm, 230(D)mm top side
  • Outside: 580(W)×661(D) ×452(H)mm
  • Door: 420(W) x 358(H)
• Weight: approximately 48 kg
• Shielding effectiveness: >60dB DC~2.5GHz, >50dB 2.5~6GHz
• Data line Capacity: 100 VDC, 3 Amps maximum
• Inner walls lined with multi layer absorber: Inner Dimension: 445(W)×445(D) ×360(H)mm, 230(D)mm top side

The shield effectiveness below is measured when the blank panel is mounted; other I/O interface panel results a different shielding effectiveness of the shield box.

• 100 to 2000 MHz > 70 dB
• 2000 to 3000 MHz > 70 dB
• 3000 to 6000 MHz > 50 dB

***Isolation example above is based on I/O configuration as specified above. Isolation may be higher or lower based on specific I/O configuration installed.

TC-5972DP/CP RF Shield Box Custom I/O Interface Panel

Customized I/O Interface panels are available. Please contact the CTS sales team for more information

I/O Interface	Order Number	Typical Data Rate/Line Voltage	Typical Shielding*
DB37, 1000pF pi Filter	3409-0012-1	3 Mbps / 100 VDC, 5 Amps max	>70 dB from 0.5 to 2 GHz >80 dB from 2 to 3 GHz >70 dB from 3 to 6 GHz
DB25, 1000pF pi Filter	3409-0009-1	3 Mbps / 100 VDC, 5 Amps max	>70 dB from 0.5 to 2 GHz >80 dB from 2 to 3 GHz >70 dB from 3 to 6 GHz
DB25, 100pF pi Filter	3409-0014-1	10 Mbps / 100 VDC, 5 Amps max	>50 dB from 0.5 to 2 GHz >60 dB from 2 to 3 GHz >60 dB from 3 to 6 GHz
DB9, 1000pF pi Filter	3409-0008-1	3 Mbps / 100 VDC, 5 Amps max	>70 dB from 0.5 to 2 GHz >80 dB from 2 to 3 GHz >70 dB from 3 to 6 GHz
DB9, 100pF pi Filter	3409-0010-1	10 Mbps / 100 VDC, 5 Amps max	>50 dB from 0.5 to 2 GHz >60 dB from 2 to 3 GHz >60 dB from 3 to 6 GHz
USB 2.0 Filter	3409-0018A-3	480 Mbps / 5 V, 500 mA / Max Current: 5A	>60 dB from 0.5 to 2 GHz >70 dB from 2 to 3 GHz >70 dB from 3 to 6 GHz
USB 3.0 Filter(Active)	3409-0042A-1	5000 Mbps / 5 V, 900 mA / Max Current: 1.5 A	>70 dB from 0.5 to 2 GHz >70 dB from 2 to 3 GHz >55 dB from 3 to 6 GHz
RJ-45 Filter	3409-0022A	1 Gbit/s Copper-Line Ethernet (1000 BASE-T)	>60 dB from 0.5 to 2 GHz >70 dB from 2 to 3 GHz >70 dB from 3 to 6 GHz
DC Power Adaptor	3406-0004A	50 VDC, 3 Amps max	>70 dB from 0.5 to 2 GHz >80 dB from 2 to 3 GHz >80 dB from 3 to 6 GHz
DC Power Adaptor, Banana Jack Type	3406-0005A 3406-0006A	50 VDC, 10 Amps max	>70 dB from 0.5 to 2 GHz >80 dB from 2 to 3 GHz >80 dB from 3 to 6 GHz
AC Power Adaptor	3103-0009A	250 VAC, 7 Amps max	>70 dB from 0.5 to 2 GHz >80 dB from 2 to 3 GHz >80 dB from 3 to 6 GHz
RF, N-SMA Connector	3408-0038		>60 dB from 0.5 to 2 GHz >70 dB from 2 to 3 GHz >70 dB from 3 to 6 GHz
RF, SMA-SMA Connector	3408-0039		>60 dB from 0.5 to 2 GHz >70 dB from 2 to 3 GHz >70 dB from 3 to 6 GHz

• Each shielding effectiveness is measured when each I/O interface panel, which is shown above, is mounted.
• Above data was measured by Tescom, The Shielding Effectiveness might be different based on the measuring method and condition.
• This data has been measured under the condition that the cables are not connected to each filters. When the cables are connected it can affect the shielding performance.